New Firmware For 6445s And 6445gt5

Ruida Firmware Updates and Troubleshooting

New Firmware for 6445S and 6445GT5

WEB Ruida has released new firmware for the 6445S and the 6445GT5 to correct issues with the rotary. Check the first two data fields in the firmware version. That will tell you if they are compatible or not.

Y-axis Issue on 6445s Controller

If your laser has a Ruida 6445s controller and the y-axis does not work using Lightburn, check the following:

1. Ensure that your machine is properly grounded.
2. Check the wiring connections between the controller and the y-axis motor.
3. Inspect the y-axis motor and encoder for any damage or debris.

Unlocking an Encrypted Ruida Controller

If you get an error message on your controller indicating that it is encrypted, you can unlock it by following these steps:

1. Connect your controller to your computer using a USB cable.
2. Download and install the Ruida RDC software.
3. Open the RDC software and navigate to the "Unlock" tab.
4. Enter the unlock code provided by your laser manufacturer.

OMTech 6442G Controller Update

OMTech has released an update for the 6442G controller. For more information and to download the update, visit the OMTech website.

Fixed Issues with Ruida USB Communications

Ruida has identified and resolved issues with USB communications in its controllers. These issues have been addressed in the latest firmware updates.

Conclusion

These updates and troubleshooting tips are designed to help you get the most out of your Ruida-based laser machine. By following these guidelines, you can ensure that your machine operates smoothly and efficiently.